Contact Us

Just how do you actually feel when it comes to Water Heater Repair?

Whether it is located in the cellar or a separate area, damaged water heating systems can trigger tension. Having no warm water supply is additionally frustrating.

Call the Plumber

After doing the very first 2 safety and security actions, you have to call your plumber to come right away to fix a burst water heating unit. There are generally indications that your aging water heater has debris buildup in the interior.

• Rusty water originating from the hot water tap


• Strange noises from within that show sedimentation


• Dripping links


• Pooled water under the container due to tiny pinholes


 
• Instead, as soon as you identify these signs, have actually an expert come to evaluate your water heating system container. Commonly, water heating units have a life-span of regarding 8 to 12 years.
  
   

  Cut Off the Cold Water Supply

  
  
  Cut off the tanks faucet water supply from the source. This goes from your main water line right into the tank. When your storage tank is in good condition, the cold water stops filling out when the container is full. Because it is leaking, the water will continue to stream. Shut the valve found at the top of the heater. Revolve this clockwise to shut it off. You should transform off that main water supply line outside your building if you can not find it or reach it.
  
   

  Shut Off Source Of Power

  
  
  Before calling the plumber, turned off a gas hot water heater by transforming the temperature dial. This is usually located on top of the thermostat. If you have a design that works on electric power, switch off the breaker. This will certainly stop electrocution, particularly if there is a leak as water is a conductor. Generally, the heating element shuts down when the water hits a specific temperature. With a busted tank, it may malfunction. Cutting it off assures you remain secure.
  
   

  Tidy up Building

  
  
  After calling the plumber, paper damages by taking notes as well as photos so you can assert your property owner's insurance. From there, begin the prompt cleanup. Get any type of vital possessions to avoid more soaking. Then, get rid of any type of standing water to stop mold and mildew development. Make use of that to drain the water if you have a submersible water pump. Otherwise, the traditional container approach will likewise function. Try to wipe out every little thing, including walls as well as baseboards. Maintain them running to keep air circulating if you have an electric follower as well as dehumidifier. This will aid prevent mold and mildew growth.
  
  Bear in mind, if you observe any concerns with your water heater, call the pros right now. You can not take this trouble lightly since a defective thermostat can increase water temperature to an alarmingly high degree, bring about accidental burns. A damaged heating unit pressure safety valve can also cause an explosion. For best results, obtain an annual check so your system gets evaluated, cleansed, drained pipes, as well as re-filled, ensuring optimum efficiency.
  
  After doing the initial 2 safety and security steps, you need to call your plumber to come right away to fix a burst water heater. Rather, as soon as you find these signs, have actually a professional come to evaluate your water heating unit tank. Prior to calling the plumber, shut off a gas water heating system by turning the temperature dial. If you have a completely submersible water pump, utilize that to drain pipes the water. Remember, if you see any concerns with your water heater, call the pros right away.
  
   

  8 REASONS YOUR HOT WATER HEATER IS NOT WORKING & HOW TO FIX
   

  
  

  Water Heater Problems & Solutions

  
  
  
   

  Loose or Damaged In-Line Valve

  
  
   

  Unlike a water leak near the bottom of your water tank, a water leak on top of your system can be easily fixed. A common cause of water tank leaks includes a loose in-line valve. This is a handle that is located at the top of the water tank that is engineered to activate or deactivate the flow of water. To fix this problem, you will need to secure the nut that holds the ball or in-line valve in its location. If the leak becomes more severe once it is tightened, you will be required to travel to your local hardware store to purchase a new in-line valve for your water heater.

  
  

  Damaged Pressure Relief Valve

  
  

  Most types of water heaters are equipped with a pressure relief valve that is engineered to discharge pressure from the water tank when it becomes too high. If this valve on top of your water heater begins to leak, we recommend purchasing a new one online or from your local store. The process of removing and replacing pressure relief valves is not complicated.

  
  
   

  No Warm Water

  
  

  If you have an electric water heater in your home, the most typical cause of a lack of warm water is a broken heating element. Your water heater is equipped with two heating elements that are tasked with heating incoming water in the water tank. Once a heating element begins to malfunction, you will have little to no hot water to use for showering, cleaning, and laundry.

  
  

  Low Supply of Hot Water

  
  

  Are you continuously running out of warm water? This issue may be a byproduct of a cracked dip tube. This tube is engineered to push cold water to the base of your water tank to be heated. Once a crack or hole begins to form in the dip tube, the incoming supply of cold water may be released near the top or middle of your tank. As a result, the cold water on top of the tank will be sent to the faucets and showers in your house. This hot water heater problem can only be fixed by replacing the dip tube on your system. Since the process of installing a new dip tube is complex, we recommend calling a certified technician for help.

  
  

  A low supply of warm water may also be a signal of excess sediment buildup in your water tank. As your water heater reaches the middle of its life cycle, minerals in water including magnesium and calcium will begin to collect at the base of the water tank. As the minerals continue to grow, there will be less room in the water tank to store hot water. To resolve this problem, flush your water heater to remove the excess minerals.

  
  

  Water is Too Warm or Cold

  
  

  If the water in your shower feels uncomfortable hot or cold, you can adjust the temperature of your water by changing the settings on your thermostat. Setting the temperature to 120 degrees Fahrenheit may help you save money on your utility bills. This is an excellent temperature to use if you’re worried about scalding or skin irritation. Does this temperature feel too cold? You may also adjust the thermostat to 140 degrees Fahrenheit to make your showers more pleasant. If your hot water heater is not working when you change the temperature, this is an indicator of a broken thermostat. Immediately find a certified plumbing or heating contractor in your area to repair or replace your thermostat.

  
  

  Low Water Pressure

  
  

  Low water pressure is not always caused by a malfunctioning water heater. If you live in an older home with smaller water pipes, the flow of water will be restricted prior to reaching our kitchen or bathroom skins. The only way to eliminate this hot water heater problem is to connect new ¾-inch water lines to your system. Another type of problem that may negatively impact your water pressure includes calcium deposits in water pipes.

  
  
   

  As magnesium and calcium begin to form in your pipes, the diameter of your water lines will become smaller. As a result, the warm water from your water heater will not be able to travel in an efficient manner to your sinks or appliances. Since the process of replacing water pipes includes removing drywall, an average homeowner that does not have a plumbing license will not be able to fix this hot water heater problem.

  https://www.wmhendersoninc.com/blog/8-reasons-your-water-heater-is-not-working-how-to-fix/

  
  
   

  We hope you enjoyed reading our section on How to Avoid a Broken Hot Water Heater. Thank you for taking the time to read through our piece. In case you enjoyed our blog post if you please remember to pass it around. We love reading our article about Broken Water Heaters.

  
  Get An Estimate